The Mexican Standard Strat benefits from subtle refinements that make for better playing and a better sounding guitar. Of all of the electric guitar designs available on these shores, converse with anyone connected to music retail and they’re likely to tell you that Mexican Fender Stratocaster s and Telecasters are comfortably among the biggest sellers. A combination of solid build quality, great value for money and that all-important Fender logo on the headstock ensure their enduring success with guitarists. Despite this, Fender is keen not to rest on its laurels and instead keeps the range bang up to date and ahead of the competition. As a result, perhaps even the gap between these instruments and the more expensive American Series is narrowing. That there is no more iconic electric guitar design than the Standard Stratocaster is a given, but it’s reasonable to say that the periodical reorganisation of the Fender range and its demarcations might leave some prospective buyers scratching their heads. There are just so many Stratocasters at so many price points these days that even we feel a little bewildered on occasion.
How to Date your Fender Guitar by Serial Number
The number 10 prefix was not recorded in their operations systems. Obviously, Fender had to do something about this, so it changed the serial number scheme a few months later. Once Fender saw the errors in the old system, they decided to go back to the previous lettering serial number schemes.
Number. Jimmie vaughan stratocaster, les paul and looking at a fender special edition, n is the landmark precision bass a mexican made fender serial number.
A Stratocaster is the name given to a model of guitar, made by the legendary Guitar Builders Fender. You cannot mistake a Stratocaser Strat for any other type of guitar. The Stratocaster has been the tool of choice for some of biggest musicians in the 20th and now 21st century. The fifties saw a new wave of music, rock n roll. This is when Fender invented the Nocaster which had to later be changed Telecaster due to a copyright infringement and then with the success of the Telecaster, they refined their design and produced the Fender Stratocaster.
Like any guitar, the body is what distinguishes it from another. Unfortunately for all other guitar builders, Fender got their design right the first time around. The body is a solid piece of wood usually one or two piece and most commonly made of Ash or Alder wood. There are some acceptions to this, with some being made with Basewood, cottonwood or Poplar.
The 3 single coil pickups are controlled by a 5 way switch. You then have 3 knobs, 2 tone and a volume swtich.
Best Year for the Fender Stratocaster
Reverend NEW! Dean Back to top of page Every Dean guitar made in United States comes with a seven digit serial number that is printed on the back of the headstock some 90s models may be stamped on the fretboard. First two numbers in the sequence are the last two digits of the production year. If you see a seven digit serial number on the back of a Dean guitar, you can be sure that it was produced in United States. Dean’s more affordable line made outside the US may require looking at features and hardware and some knowledge of the line.
Here the serial is decoded as:.
How to Date your Fender Guitar by Serial Number. I have a fender stratocaster One website I how to said it was made in Mexico in. But, the customer said her.
Normally the difference between the standard Fender brands and the Squier brands of guitar are clear and plain, but in the 90s, a number of guitars were released by Fender that blurred this distinction. The Fender “Squier Series” of Stratocasters will not be familiar to many guitar fans, but in this piece, we’ll take a look at this unique series and what marks them out from the usual budget range of Squier guitars. Following my recent experiences with a Fender Stratocaster that I bought at eBay, I thought I would put together this page to help other potential buyers spot if they are getting a standard or “Squier Series” Stratocaster.
It turns out that the one I bought was not a standard Fender Stratocaster despite being sold to me as one. What I didn’t know, and nor did the seller was that this was in fact a “Squier Series” Stratocaster. I’d not heard of these sort of guitars before so at first was a bit worried I’d bought a dud. Don’t get me wrong, it is a lovely guitar, but I uncovered a surprise when I took the neck off to make some adjustments. There in the neck pocket was a stamp that said Squier.
I was initially horrified thinking I had a cheaper body stuck on the guitar neck, but turned to the internet to try to learn what was going on.
Fender Mexican Standard Stratocaster review
At Gear4music. With a feature-laden specification and created under the guidance of Fender USA, MIM guitars are high-quality instruments that truly warrant the iconic Fender logo. The Fender Player Series is a new line of guitars designed to replace the Standard Series, with an upgraded specification and some wonderful new colours for The Fender Mexican factory turned 25 years old in and has been producing a complete range of Fender guitars and basses under the guidance of Fender USA.
Located in Ensenada, Mexico, Instrumentos Musicales Fender is only a short mile drive from Fender Musical Instruments in Corona, California, yet that cross-country location means the MIM guitars and basses offer exceptional value for money.
Fender is continuing a revamp of its iconic guitars with new versions of its legendary made-in-Mexico instruments. The guitars cover the entire.
Forum Rules. Remember Me? Results 1 to 9 of 9. Thread: How to identify a Strat body? How to identify a Strat body? Sign in to disable this ad. How can you tell what year it was made? Are there any websites with all this information? Can I ask any more questions? Sorry, should’ve been more specific. I’m talking about just the body. From what I understand, Fender didn’t put serial numbers on their guitar bodies still don’t? I guess you can tell I’m not a Strat guy.
Join Date Oct Location within the usual boundaries
The Fender “Squier Series” Stratocaster—Not a Typical Squier!
I have a fender stratocaster original custom body with the serial mim JC and i cant find the date, could you help me? Period, NO exception. And NO; the instrument mim NOT been altered in any dating, was in great shape although a bit dirty , and the quality level was impressive. On the face dating serial headstock mim says original telecaster body telecaster under Fender it says with synchronized Tremolo.
DATING YOUR U.S.-MADE FENDER STRINGED INSTRUMENT For most of (The California Series instruments with an AMXN prefix share U.S./Mexico origin.).
The Highway-1 series Strats basically an American-assembled MIM with 70’s styling and a few other tricks did a little of this my H-1 has Greasebucket tone circuits which reduce the boominess you get when you roll off the tone , but usually when you buy an American Standard Strat you are getting exactly that. Wood, electronics, pick-ups, basically all of the parts of the guitar can be different in Mexico and American made fenders, depending on model and build date.
Made-In-Mexico ones are still Fender products, and quality instruments. The general complaint against Made-In-Mexico Fender’s is the build quality is a bit hit or miss.
Mexican Fender Serial Numbers
Pre Fender guitars have a serial number on the bridgeplate or neckplate. Serial numbers are basically chronological, but there is some overlap amoung years. Assembler reached in and grabbed one or many. Put them on the instrument s. As you can see from this over-simplified example, serial number assignment was fairly random.
The Japanese MIJ (Made in Japan) Squiers were made by FujiGen up to and the “MZ1” indicates that is was made at Ensenada, Mexico in
Inside a Fender Jazzmaster. Inside a to Fender Telecaster video. Inside a to Fender Stratocaster video. For most collectors, pre-CBS pre Fender vintage guitars and amps are the desirable ones. Although CBS purchased Fender officially on January 3rd , it took some time till the guitars changed though by mid , six months before CBS bought Fender, things were already “on the way down”.
By the end of , the general look and feel of the Fender guitars had changed significantly. All collectors feel the quality of their instruments and amps suffered as CBS employed more “mass production” manufacturing processes to the Fender guitars. The “large peghead” starting in late as used on the Fender Stratocaster was one example of the bad changes to come.
The “custom contoured” bodies Fender was famous for no longer were as sculped and sleek. Newer and less attractive plastics were used for the pickguards. Pearl fingerboard inlays replaced the original “clay” dots. Indian rosewood replaced the beautifully figured Brazilian rosewood on the fingerboards. And by , polyurathane replaced the original nitrocellulose lacquer that was used from Fender’s conception.
By early the party was truely over.
Fender Player Series Review
Or a Fender Hot Rod Deluxe. Or both. To say these are products that are part of the staple diet for the grassroots gigging musician is an understatement. We all know the story: our first guitar was a borderline-unplayable nylon-string acoustic, then we graduated to a Squier Strat while making a teenage racket in the garage. Although the funky Duo-Sonic and Mustang models in the Offset series that arrived back in represent a hip and very reasonably priced entry point into the catalogue, not everybody shopping for their first Fender wants a compact, short-scale instrument.
Just ahead of Summer NAMM , Fender has decided that the time is right to reimagine its entire Ensenada-made Standard line, last overhauled back in
DATING YOUR USA MADE FENDER ELECTRIC STRINGED Guitar [click here] for your Japanese or Mexican Fender Guitar serial number.
In the early to mids Fender realized that labor and shipping costs overseas were being to rise, so Fender decided it would be easier to set up a plant in Ensenada, Mexico. Fender Mexico was established May 5, Fender started producing guitars in its , sq. Ensenada plant in Due to production times and shipping dates, there is an overlap between each years guitars. That is why each number has two years of production.
Music Gear News
Fender began producing instruments in its Ensenada, Mexico, factory in The numbers for each year typically overlap, as there is always a transitional period between successive years and as necks that are made and serial numbered late in any given year are used on instruments assembled in the early months of the following year.
Only the seven-digit suffixes were actually entered into the database. These serial numbers did not identify the country of origin in the body of the number.
Do you think it may be the best Mexican strat ever, and if not, Which is the best Mexican strat series to date, in your opinion? Like.
Subscriber Account active since. For guitar players, a chunk of wood at the top of their instrument matters. It’s the headstock, and that’s where the name of the guitar maker is found. Teenage musicians quickly learn the hierarchy: inexpensive, entry-level guitars dwell far below their far pricier counterparts. So begins the guitarist’s march up the ladder. That process, however, has undergone some changes in the past decade, and one of the world’s most famous purveyors of rockstar dreams, Fender, is smack in the middle of it.
Dating my mexican strat
Username or Email. Password I forgot my username or password. Keep me signed in. Clear the check box if you’re on a shared computer. Please enter your username, and you will recieve a new password for your account.
Mexican made guitars generally follow the following rules: For any fender, if you want the exact year you will need to check the date stamped on the butt end of.
How can I find out when my American-made instrument was manufactured? Most notably, production dates have been penciled or stamped on the butt end of the heel of the neck of most guitars and basses, although there were periods when this was not consistently done to , for example or simply omitted. Neck-dating can be useful in determining the approximate age of a guitar, but it is certainly not definitive because the neck date simply refers to the date that the individual component was produced, rather than the complete instrument.
Given the modular nature of Fender production techniques, an individual neck may have been produced in a given year, then stored for a period of time before being paired with a body to create a complete guitar, perhaps, for example, in the following year. Therefore, while helpful in determining a range of production dates, a neck date is obviously not a precisely definitive reference. Most specifications for a given Fender instrument model change little if at all throughout the lifetime of the model.
While there have been periods of dramatic change—such as the transition periods between the Leo Fender years and the CBS years or the transition between the CBS years and the current ownership—most models are generally feature-specific and do not change from year to year. For years, serial numbers have been used in various locations on Fender instruments, such as the top of the neck plate, the front or back of the headstock and the back of the neck near the junction with the body.
The chart below details Fender serial number schemes used from to Notice that there is quite a bit of overlap in numbers and years. Fender was sold to CBS in January